Gallery
Richard wanted a heating and cooling system, but he had no ductwork at the time. Through some options we gave, he chose a two-headed ductless. We installed one upstairs and one downstairs. This was a great solution for a home with an open floor plan.
The blower motor in the homeowner’s furnace failed. Due to the age of the furnace, we recommended replacement rather than repairing the unit. We gave them several options, and they decided on the TM9E, which has 95% efficiency. We are sure they will be happy for many years to come with the heating comfort this unit offers.
At the time of the install, the customers’ system was running well, but it was really old. They decided to update to a York® 16 SEER heat pump. This is more efficient equipment with better filtration. They were proactive in replacing their equipment rather than waiting until there was a major repair issue.
Joe called us when his heat pump quit working. The system was more than twenty years old, so we recommended replacement rather than repair. Of the several options given, he selected a York® 18 SEER higher efficiency horizontal heat pump to heat and cool his home. This unit will save him money in the long run. It provides high-quality, efficient comfort, and has a 40% smaller footprint compared to a traditional vertical discharge unit. The unit also has 36% quieter operating sound.
Our customer needed a cooling unit in his garage. We set him up with a Fujitsu mini-split ductless heat pump system. This unit works well for small room applications.
This customer’s air conditioner was not keeping their home cool. With the installation of a York® LX Series 13 SEER air conditioner, they are enjoying a cool and comfortable home during the hot summer months. This model has a quiet, direct-drive fan designed to minimize vibration and sound, and the compact cabinet puts advanced performance in less space.
This was a new building for which we installed heating and cooling units. It was an office space, and these Fujitsu ductless heat pumps are a great solution for their heating and cooling needs. We are sure they will be well pleased with the comfort these provide.
The homeowners had no cooling, no heating, and no ductwork. Between the homeowners’ and us, we decided a Fujitsu ductless mini-split heat pump would best fit their needs. They have a great warranty of 10 year compressor and parts.
These folks had no air conditioning and were sick and tired of the hot weather. They wanted to be comfortable, so we installed a brand-new York® 13 SEER air conditioner. York takes pride in their home comfort systems. They are designed, engineered, and assembled in the United States. This unit has durable steel louver coil guards. This will help protect against coil damage. It has a quiet, direct-drive fan design, which minimizes vibration and sound. Our clients can be confident they are going to stay cool for years to come with their new purchase.
Due to damaged parts on our customer’s heat pump, a repair was not cost-effective. They chose to go with a York® 13 SEER LX series split system. These units have reliable operation with a robust compressor. They have an enduring powder coat paint that provides a great look and quality finish even after years of exposure. Its compact cabinet takes up less space and is a great solution for installations in a tight location. This is also safe for the environment as we use R410A-refrigerant that does not harm the ozone and keeps your system safe and efficient. These units are manufactured in the United States from design to assembly, ensuring a quality product.
When it’s cold outside, everyone wants to relax in a warm, cozy home. The York® TM8E is a great choice at an affordable price. Its performance is dependable and energy efficient. York is a leader in innovative design. Our customer is going to be comfortable in the cold months with the system he purchased. Our client also installed a York® 13 SEER air conditioner for those hot months when they wants to chill inside.
Our customer chose to go with a York® 14 SEER heat pump system for their home. This unit has a durable, coated steel wire fan guard that will protect the coils of the heat pump. Warm air is blown up and away from the structure and any landscaping. The heat pump features advanced, inverter-driven modulating technology. A modulating heat pump system provides only what is needed to heat the space and so avoids oscillating temperatures while reducing energy consumption. These York® heat pumps are engineered and assembled right here in the United States. This unit is reliable in cold-weather operation, providing our customer some cozy days in the winter months.
This customer had a smaller home and chose to use a Fujitsu ductless mini-split system. The unit went in the client’s bedroom and was a great choice as these units are whisper-quiet and energy-efficient in their heating and cooling. Fujitsu has over 40 years of heating, ventilation, and air conditioning experience. With a 99% product performance rate, they can be confident that their Fujitsu ductless system will be keeping them comfortable year-round. This customer is happy with the quiet operation, easy maintenance, and the high delivered efficiency, leading to lower utility bills.
Our client decided to go with the York® TM9V gas furnace, which has a two-stage operation with a variable speed blower. Two-stage gas furnaces can shift their level of performance to track temperatures more accurately thus providing more comfort. This unit comes with reinforced cabinets and gasketed doors to ensure warm air goes where it is needed quietly and efficiently. The client was happy with the offered 10 year parts and labor warranty. They also were excited to find out this unit was made in the USA. The York® LX series gas furnaces have the Good Housekeeping Seal of Approval, and they also meet the U.S. EPA energy efficiency standards.
York® home comfort systems are keeping our friends and neighbors comfortable in homes across the Willamette Valley. We take pride in the fact that York air conditioners are designed, engineered, andS assembled in the United States. Our customer chose a York® 13 SEER air conditioner for their cooling needs. With its compact cabinet it requires less space for installation, and its durable steel louver coil guards provide protection against coil damage.
The Fujitsu mini-split system is whisper quiet and energy efficient for heating and cooling your home. These units do not require ductwork, and their slim unit allows for flexibility in installation and room by room temperature control. A great option for smaller homes or for heating small shops or garages.
This customer chose to go with a 13 SEER 2 ton YORK® air conditioner. This unit has a quiet, direct drive fan deign which helps to minimize vibration and sound. It comes with a long lasting, powder coat paint and will give years of protection for outdoor exposure. Its small footprint cabinets deliver big performance with features that fit your needs and don’t break the budget.
This customer chose a Fujitsu mini-split system. These systems are great for spaces requiring additional capacity but are limited in space. The units have easy-to-read, large displays and easy-to-operate buttons. They require no ductwork to install and are whisper-quiet and energy-efficient in their heating and cooling.
Our customer chose the YORK® 14 SEER air conditioner for their home. This compact cabinet gets great performance in less space. The direct-drive fan design lessens the vibration and sound for quieter operation. This unit will provide their family comfort, energy savings, and lasting performance for years to come.
Our customer had us install a YORK® split system air conditioner in their home. This unit is very kind to your wallet. It’s expertly designed and engineered in the U.S., so the quality is top notch and will prevent future repairs and save our customer money. The cooling efficiency can also save energy costs compared to older units. The compressor and parts have a 10 year warranty as well.
Our customer chose a Fujitsu wall mount heat pump for their space. These systems use environmentally friendly R410A refrigerant, and their quiet operation cuts down on noise pollution.
Our customer bought a Fujitsu ductless mini split system for their space. These systems use environmentally friendly R410A refrigerant, so there’s no worry of harming the ozone.It also detects whether someone is in the room or not, adjusting the temperature accordingly. This prevents wasteful operation to save energy without thinking about it. This feature can be deactivated if chosen.
We installed a YORK® single-stage operation gas furnace for our customer. We prioritize the comfort of our customers while ensuring we take care of the earth, and we know this furnace will do both. Its hot-surface ignition and 100% shutoff valve technology increases dependability and reliability so our customer will have consistent heating and cooling for the comfort of their home. With its high efficiency blower motor and advanced, tubular aluminized steel primary heat exchanger, this unit’s design meets U.S. EPA energy efficiency standards, saving energy for the planet and your pocket.
This unit is a YORK® split system air conditioner. We installed it to take care of our customer’s cooling needs in an efficient, reliable, budget-friendly manner.
Our customer purchased a YORK® gas furnace. This unit will abundantly provide for our customer’s heating needs, with its high-efficiency blower, intelligent design, and precision construction.
We installed a YORK® split system air conditioner for our customer’s cooling needs in their home. A homeowner is always concerned about the cost of energy, but these units are very cost-effective and keep a load off the wallet. Its cooling efficiency can save energy costs compared to older units, and quality engineering reduces repairs to save them money. The unit comes with a limited 10 year compressor and parts warranty as well, ensuring long-lasting savings.
Our customer chose a YORK® split system air conditioner for their cooling needs. Expertly designed and engineered, and rigorously tested, this air conditioner offers the latest in energy savings and lasting performance for years to come. The unit is designed and construed for optimal performance and serviceability.
Our customer bought a YORK® heat pump and YORK® gas furnace. This heat pump has a smaller footprint than standard units—ideal for high-density areas. They can be placed anywhere a vertical unit can, and often in places a standard unit can’t fit, due to placement, clearance, and a slim design. This heat pump has an innovative fan design that creates less vibration and provides quieter operation, with sound output as low as a typical dishwasher at 54 dBA (36 percent lower sound levels than standard heat pump units). This gas furnace has reinforced cabinets and gasketed doors to ensure warm air goes where it’s needed, quietly and efficiently. YORK® LX Series gas furnaces bear the Good Housekeeping Seal of Approval. It’s just another reminder of the quality that comes standard in every YORK® product we install.
This long-term customer of ours had their unit fail. We managed to find a like-for-like unit and installed it within a day or two so they were not without cooling for long.
This customer selected a YORK® gas furnace and a YORK® heat pump for all their heating and cooling needs. YORK® systems are designed, engineered, and assembled in the U.S. They use their advanced manufacturing expertise to provide world-class quality at a competitive price. YORK® units are all about quality; that’s why they offer a limited 10 year warranty on compressor and parts, ensuring a well-running unit for years to come. Our customer will be very satisfied with the comfort these units provide.
Our customer bought a YORK® split system air conditioner and YORK® gas furnace. This gas furnace is a two-stage furnace, allowing it to shift its level of performance to track temperatures more accurately and provide greater comfort. These units are designed to be compact to fit in tight spaces such as basements, attics, recreation rooms, garages, alcoves, and even closets. The air conditioner is the next grade efficiency in entry-level models. It meets new and updated DOE 2023 minimum requirements. These units are eco-friendly with their CFC-free R-410A refrigerant, which delivers environmentally friendly performance with zero ozone depletion.
This is a YORK® split system air conditioner and YORK® electric furnace our customer bought and had us install for the comfort of their home. This air conditioner is tested to be tough with more than 250,000 hours of research, accelerated field trials and extreme weather testing ensure reliable performance that lasts. A long-lasting, powder-coat paint provides a durable, automotive-quality finish that looks great, even after years of outdoor exposure. The electric furnace is designed to optimize performance and efficiency while keeping it compact with a 21-inch casing depth. This casing allows for ease of access in attics and applications where space is limited. This unit has a next-generation, high-efficiency blower design that delivers improved efficiency. A new, even-flow distributor design has an improved and balanced refrigerant flow and even coil circuit performance. We know these units will keep our customer in the best of comfort all year round.
We installed a YORK® split system air conditioner for our client. These units are designed, engineered, and assembled in the United States, and the processes are monitored and improved to directly affect quality. These high standards allow for 10 year compressor and parts warranty, ensuring long-lasting performance and savings.
We installed a YORK® split system air conditioner for our customer’s home comfort system. Our customer lives in a flood plain, so we built a stand raising the unit above flood elevation. We work with our customers to find the best solutions for their home regardless of the situation.
Our customer chose a YORK® single-stage gas furnace for us to install for the comfort of their home. This unit is well engineered and constructed. It’s built with reinforced cabinets and gasketed doors, ensuring warm air goes where it’s needed quietly and efficiently.
We installed a multizone ductless mini-split system for our customer’s home comfort needs. This system is super quiet as well as highly energy efficient. The wall mounted units are high on the wall, out of sight and do not require ductwork, increasing energy efficiency and lowering utility bills.
Our customer decided on a YORK® gas furnace with a high efficiency blower to take care of their comfort needs. This unit has hot-surface ignition and 100% shutoff valve technology saves on fuel costs while increasing dependability and reliability. The unit also comes with 10 year parts warranty, ensuring long-lasting savings when repairs are needed.
These rooftop units are great for commercial warehouses and office spaces. They will provide great heating and cooling all year round.
We installed these rooftop units for our customer’s warehouses.
Our customer chose a YORK®split system air conditioner for the cooling comfort of their home. This unit is designed with a compact footprint, given a durable powder-coating painted finish, and built with a sturdy cabinet and top design to provide sound performance of 77dBA or lower.
Our customer picked out a YORK®split system air conditioner for their heating and cooling system.This air conditioner has aluminum alloy micro-channel coils for maximum efficiency and durability. It has a unique low-sound fan design with its direct-drive fan design minimizing vibration and sound.
This gas-fired unit heater is suspended easily, designed for quiet operation, and engineered with safety in mind. We installed it for our customer, knowing it would serve their comfort needs for years to come.
This YORK® split system heat pump was installed for our customer’s home comfort, offering a durable finish, reliable operation, and environmentally friendly refrigerant. It has a protected compressor to ward off moisture and debris, and the coils are covered with a steel coil guard design that protects against mechanical damage.
A wall mounted, single-zone mini-split system is just what was needed in our customer’s home. This system is extremely versatile and can be put just about anywhere that requires comfort. The units are very quiet at about 21-49dB(A), which is the volume of whisper
We installed this ductless mini-split heating and cooling system for our customer to give them the best solution for their comfort problems. These systems are highly efficient, whisper quiet, and great for targeted temperature control.
This customer bought a YORK® two-stage air handler and a YORK® side-discharge heat pump to manage the comfort level of their home all year long. This air handler unit is designed for high efficiency, easy and compact installation, and consistent, improved performance. The heat pump is designed to have an exceptionally smaller footprint compared to traditional heat pumps. This particular model also is eligible for tax credits in the Northern US and Canada.
We installed an electric furnace and a YORK® split-system heat pump for our customer’s heating and cooling system. The electric furnace features a zero-clearance design, allowing the furnace to be installed where space is at a premium. This unit also features a built-in, fully insulated coil cabinet, efficient operating performance and factory-installed door. The heat pump is designed, engineered, and assembled in the United States; our customer can be confident a YORK® system will provide them with comfort, quality, energy savings, and lasting performance for years to come.
Our customer replaced his old furnace for a new YORK® LX series gas furnace. This model has two-stage operation with a quality, high efficiency blower. Two-stage furnaces can shift their level of performance to track temperatures more accurately and provide greater comfort. The unit also has outstanding warranties of lifetime heat exchanger and 10 year parts.
Our customer chose a YORK®gas furnace to replace their old, rundown unit. This furnace was designed, engineered, and assembled in the United States using state-of-the-art quality control and assembly processes to provide world-class quality at competitive prices.This high standard of quality allows for outstanding warranties of lifetime heat exchanger and 10 year parts, ensuring long-lasting, reliable comfort.
Our customer chose a YORK® split system air conditioner and a YORK® gas furnace to supply all their heating and cooling comforts. These units are expertly designed and engineered, rigorously tested, and absolutely ensured with a manufacturer-backed warranty. They are quiet, efficient, and economic, giving our customer both quality and comfort.
We installed a single zone, wall mounted, mini-split system for our customer to keep every part of their house comfortable. It is made with high delivered efficiency in mind to lower utility costs, and the system is designed for quiet operation so it does not disturb the peace of the home.
Our customer decided to use a YORK® gas furnace to adjust the comfort level of their home. This unit is designed to be slim and easy to place in a closet, attic, garage, or any tight space in a home. It is pre-assembled, wired, and tested from the factory, so setup is quicker than ever. It’s great for a quick fix.
We installed these units for a commercial building after some issues arose with their old units. We recommended replacement, and they are now up and running, keeping the environment warm and comfortable.
This multi zone ductless heat pump was installed to take care of our customer’s comfort level throughout the house. These multi zone systems can operate one or all units at one time, and they are great for personalizing the whole home. The wall mounted units require no ductwork, increasing energy efficiency and lowering utility bills. It is the perfect solution for both quality and comfort.
We installed a YORK® gas furnace and a YORK® split system air conditioner to give our client a quality home comfort system. These units are given great warranties of 10 year parts, ensuring long-lasting quality and savings so our customer is confident in their equipment.
Our customer chose a YORK® gas furnace for their home comfort system. This unit has an advanced, tubular aluminized steel primary heat exchanger that allows for high heat transfer and outstanding efficiency. The reinforced cabinets and gasketed doors help ensure warm air goes where it’s needed, quietly and efficiently. We are sure that this high-quality furnace will serve our customer well.
We believed a YORK® gas furnace and a YORK® heat pump would be good, quality solutions for our customer’s heating and cooling needs. The heat pump is a side-discharge model, designed to be compact, quiet, and efficient. It also has great warranties of 10 year compressor and 10 year parts to alleviate any fears concerning the quality of the unit. The gas furnace uses hot-surface ignition and 100% shutoff valve technology, saving on fuel costs while increasing reliability. Our customer will have a comfortable while cost-effective home for many years to come.
We installed a multi zone ductless heat pump for a home comfort system to supply all the heating and cooling needs. This system is super quiet as well as highly energy efficient. It does not require ductwork and is easy to maintenance. These are especially good for personalizing the whole home as each indoor unit can be operated independently via remote control.
We put in a multi zone ductless heat pump for a heating and cooling system in this house. The system can operate from 2 to 5 indoor units simultaneously, and its wall mounted units are high and out of sight with quiet operation so as not to disturb the sanctuary of the home.
Our customer chose a YORK® gas furnace to regulate the comfort in their home. With hot-surface ignition and 100% shutoff valve technology, this unit will save our customer on fuel costs while increasing dependability. The unit is very compact, allowing for installations in basements, attics, recreation rooms, garages, alcoves, and even closets.
Our customer chose a YORK®gas furnace to replace their old, rundown unit. This furnace was designed, engineered, and assembled in the United States using state-of-the-art quality control and assembly processes to provide world-class quality at competitive prices.This high standard of quality allows for outstanding warranties of lifetime heat exchanger and 10 year parts, ensuring long-lasting, reliable comfort.
We installed a YORK® gas furnace to keep our customer’s home warm and comfortable all season long. Its reinforced cabinets and gasketed doors help ensure warm air goes where it’s needed, quietly and efficiently. The unit also has hot-surface ignition and 100% shutoff valve technology, saving on fuel costs while increasing reliability. We are confident our customer will be pleased with the comfort and quality this gas furnace brings.
Our customer chose a YORK® air handler and a YORK® heat pump to equip their home comfort system. The air handler is designed with a high-efficiency blower, a rigid case construction with smooth sides, and corrosion-resistant, high-quality aluminum coils. The heat pump is designed with a 40%smaller footprint and a 36% quieter operating sound compared to a traditional vertical heat pump. We are sure our customer will be pleased with the quality and comfort these units will provide.
We installed a YORK® gas furnace for our customer’s heating and cooling system. This unit is designed, engineered, and assembled in the United States, crafted using state-of-the-art quality control and assembly processes. It comes with lifetime heat exchanger and 10–year parts warranties. This furnace is built with quality, comfort, and reliability in mind. We are certain of our customer’s satisfaction for years to come.
We installed a YORK® gas furnace for our customer to control the comfort level in their home. This unit is designed with an advanced, tubular aluminized steel primary heat exchanger that allows for high heat transfer and outstanding efficiency. It has reinforced cabinets and gasketed doors to ensure warm air goes where it’s needed, quietly and without waste. We are certain our customer will be in the best of comfort with this quality equipment.
Our customer chose a YORK® gas furnace to heat their home and keep their family comfortable. Designed, engineered, and assembled in the U.S., this unit is crafted using state-of-the-art quality control and assembly processes. This allows for outstanding warranties of lifetime heat exchanger and 10-year parts to be offered. Our customer will be well pleased with the quality and comfort this unit will provide.
We installed a commercial gas pack for a building’s heating and cooling comfort. We are positive our customer will be satisfied with the quality and performance of this unit.
Our customer decided a YORK® gas furnace would be the best solution for the heating comfort in their home. This gas furnace series bears the Good Housekeeping Seal of Approval, showing the quality that comes in every unit. We are positive this furnace will serve our customer well.
Our customer picked a YORK® gas furnace to regulate the heating and cooling comfort of their home. This furnace is built with an advanced, tubular aluminized steel primary heat exchanger that allows for high heat transfer and outstanding efficiency. It also has hot-surface ignition and 100% shutoff valve technology to save on fuel costs while increasing reliability. This unit is sure to give our customer the best in both quality and comfort.
We installed a counterflow wall furnace to warm our customer’s home. Counterflow wall furnaces circulate warmth at floor level to provide comfort at a fraction of the cost of electric heat. The front panels remove easily for cleaning and servicing. We always look at the needs of our customers to find the best solutions for their home, and this unit is perfect for the comfort of their home.
Our customer chose a YORK® side-discharge heat pump for us to install in their home comfort system. The unit is designed with up to a 40 percent smaller footprint compared to a traditional vertical discharge unit, a 36 percent quieter operating sound as low as 54 dBA, and modulating technology to smoothly ramp up operation and continuously adjust, avoiding spikes in energy use while helping to increase overall system longevity and reducing the homeowner’s energy bills. We believe this heat pump will serve our customer well for years to come.
This YORK® gas furnace was chosen by our customer to ensure comfort and reliability for their home during the winter months. The furnace was built with quality, efficiency, and dependability in mind. Designed, engineered, and assembled in the United States, the unit is crafted with state-of-the-art quality control and assembly processes. Hot-surface ignition, 100% shutoff valve technology, reinforced cabinets, and gasketed doors save on fuel costs. Outstanding warranties of lifetime heat exchanger and 10 year parts are possible due to the commitment to excellence. We are certain our customer will be served well by this unit for many years.
We installed a YORK® gas furnace and a YORK® horizontal discharge air conditioner to manage all our customer’s heating and cooling comforts. The gas furnace is designed with an advanced, tubular aluminized steel primary heat exchanger, allowing for high heat transfer and outstanding efficiency. While the furnace warms in the winter, the air conditioner is ready for the summer. With inverter-drive technology smoothly ramping up operation and continuously adjusting, the unit avoids spikes in energy use while helping to increase overall system longevity and reducing the homeowner’s energy bills. The fan design creates less vibration and provides quieter operation, with sound output levels 36% lower than standard heat pump units. It’s also 40 percent more compact than standard heat pump units and often fits in tighter spaces. Our customer will be pleased by the quality and comfort these units supply.
Our customer chose a YORK® gas furnace to replace their old, failing furnace. This unit is built with tight spaces in mind. Compact, 33-inch tall cabinets can be installed in basements, attics, recreation rooms, garages, alcoves, and even closets. The reinforced cabinets and gasketed doors help ensure warm air goes where it’s needed, quietly and efficiently. We are positive this furnace will satisfy our customer’s heating and cooling needs.
This YORK® gas furnace was installed for our customer’s home comfort system to provide the best in quality and service. It is engineered with efficiency in mind: an advanced, tubular aluminized steel primary heat exchanger allowing for high heat transfer; the hot-surface ignition and 100% shutoff valve technology saving on fuel costs; and the reinforced cabinets and gasketed doors ensuring warm air goes where it’s needed without waste. This unit will do an excellent job warming our customer’s home without breaking the bank.
We installed a YORK® gas furnace for our customer’s comfort system. A compact, 33-inch tall cabinet fits in tight spaces, allowing for installations in basements, attics, recreation rooms, garages, alcoves and even closets. Reinforced cabinets and gasketed doors help ensure warm air goes where it’s needed, quietly and efficiently. This unit is built with quality and the comfort of our customer in mind.
Our customer chose a YORK® gas furnace to provide themselves with a quality comfort system. This unit is a two-stage gas furnace. Two-stage furnaces can shift their level of performance to track temperatures more accurately. Advanced, tubular aluminized steel primary heat exchanger allows for high heat transfer and outstanding efficiency, and hot surface ignition and 100% shutoff valve technology saves fuel costs while increasing dependability. This furnace will serve our customer well while also cutting their energy bill.
We installed a YORK® two-stage air handler for our customer, designed to improve comfort, increase energy savings, and provide lasting performance. Their high-efficiency design can boost your air conditioner or heat pump efficiency, which can translate to lower energy bills. Additionally, the fully insulated cabinet is designed for ultra-low leakage and low air infiltration, saving energy.
Our customer chose a YORK® variable-speed air handler to improve their home comfort system performance. Variable-speed motors match operation to the exact speed needed, consuming less energy over time and reducing noise levels. This provides a more comfortable space and more efficient operation.
We installed a YORK® single-stage gas furnace in our customer’s attic. These compact cabinets have been designed to fit in tight spaces, but that doesn’t mean they skimp on efficiency. In testing, there was less than one percent airflow leakage, and the electronic hot-surface ignition saves on fuel costs with increased dependability.
Our customer decided a YORK® gas furnace would bring them all the comfort and quality their home comfort system needed. This furnace has hot-surface ignition and 100% shutoff valve technology to save on fuel costs while increasing dependability, and the reinforced cabinets and gasketed doors help ensure warm air goes where it’s needed, quietly and efficiently. We are confident this unit will provide for our customer with both quality and decorum.
We installed a YORK® gas furnace in our customer’s home to give them a reliable and cost-effective comfort system. This unit is designed with an advanced, tubular aluminized steel primary heat exchanger, allowing for high heat transfer and outstanding efficiency. It also has warranty of lifetime heat exchanger and 10 year parts; our customer will be satisfied with the energy-saving comfort that lasts a lifetime.
We install residential and commercial units. We cover HVAC needs across the board.
This YORK® gas furnace was chosen and installed for our customer’s home to keep them and their family comfortable all year long. The unit is designed, engineered, and assembled in the United States using state-of-the-art quality control and assembly processes. These furnaces bear the Housekeeping Seal of Approval, showing the quality that comes standard in every unit. We are positive it will serve our customer well throughout the years.
A YORK® gas furnace was exactly what our customer needed to keep their home comfortable throughout. It’s easy to install with its 33-inch tall cabinet that fits in plenty of tight spaces, allowing for installations in basements, attics, recreation rooms, garages, alcoves, and even closets.
We installed a YORK® gas furnace to take care of our customer’s home comfort system. This unit is designed, engineered, and assembled in the United States using state-of-the-art quality control assembly processes to provide world-class quality. The top-notch craftsmanship allows for great warranties to be offered of lifetime heat exchanger and 10 year parts. Our customer can be confident that their needs will be met in every way.
Our customer chose a YORK® gas furnace and split system air conditioner to supply their comfort system with quality equipment. The furnace is issued with hot surface ignition and 100% shutoff valve technology which saves on fuel costs while increasing dependability. The air conditioner is built with a unique low-sound fan design and aluminum alloy micro-channel coils for maximum efficiency and durability. These units will provide lasting heating, cooling, and savings for our customer for years to come.
We always keep the needs of our customer in mind when looking to upgrade their HVAC system. This electric furnace features a zero-clearance design, allowing the furnace to be installed where space is at a premium. They also feature a built-in, fully insulated coil cabinet, efficient operating system, and factory-installed door. Our customer will be pleased with the engineering and performance of this unit.
We installed a YORK® split system air conditioner for our customer’s care and comfort system. This unit is built to last with aluminum alloy micro-channel coils for maximum efficiency and durability, an automotive-grade powder-coating painted finish, and manufacturer-backed warranty of 10 year compressor and 10 year parts. We are confident this unit will serve our customer well and provide the best in quality and satisfaction.
Our customer decided a YORK® single-stage, non-condensing gas furnace and a YORK® split system air conditioner would pair well together to look after their HVAC home comfort system. The gas furnace is designed with a five-speed, direct-drive ECM blower motor which improves SEER2 ratings while using less electrical power. A blower-off delay and an electronic hot-surface ignition saves on fuel costs with increased dependability. The air conditioner is engineered with aluminum alloy micro-channel coils for maximum efficiency and durability and a unique low-sound fan design for quieter operation. These units are built with quality in mind for our customers.
We installed a YORK® gas furnace and a YORK® split system air conditioner to take of our customer’s home comfort system. The furnace is two-stage operation with a high-efficiency blower. Two-stage furnaces can shift their level of performance to track temperatures more accurately and provide greater comfort. The air conditioner has 13.4 SEER2 cooling efficiency that can save energy costs compared to older units, and quality engineering reduces repairs to save money. These units will have top notch service while keeping costs low.
Our customer wanted an upgrade for their home comfort system. They chose a YORK® gas furnace with a single-stage operation and high efficiency blower. This unit and its components are such high quality that they come with an outstanding warranty of lifetime heat exchanger and 10 year parts. Our customer can be confident they are getting excellent equipment that will last for many years to come.
This YORK® gas furnace was chosen for our customer to get them up and running and supply their comfort system needs. This unit is designed, engineered, and assembled in the United States, crafted using state-of-the-art quality control and assembly processes, and wired and tested from the factory. This commitment to excellence allows a warranty offer of lifetime heat exchanger and 10 year parts. We are positive our customer will be quite satisfied with the comfort this furnace provides.
This YORK® gas furnace was installed with our customer’s HVAC needs in mind. We always look for the best options figured into the current system in the house. This unit is compact with a 33-inch tall cabinet, allowing for installation in a basement, attic, recreation room, garage, alcove, and even a closet. We want the right fit for every home, and this unit will both match our customer’s home and provide quality comfort.
We installed a YORK® single-stage, non-condensing gas furnace to cover our customer’s comfort needs. This unit is built compact for installation in tight spaces, and the electronic hot-surface ignition and blower-off delay designs will improve efficiency and dependability. We’re confident this furnace will meet our customer’s needs above and beyond!
This electric furnace features a zero-clearance design, allowing the furnace to be installed where space is at a premium. It also features a built-in, fully insulated coil cabinet, efficient operating performance and factory-installed door. This unit will serve our customer well for years to come.
We installed this single-zone mini-split system to improve our customer’s home comfort. This system knows how to save money even when it is forgotten. If the unit is left running when no one is around, 20 minutes later the set temperature is increased by 4 degrees when cooling and reduced by 8 degrees when heating. When the sensor detects activity, it returns to the previous operating mode. This prevents wasteful operation to save energy without thinking about it. We are certain our customer will be pleased with the savings and service of their new equipment.
Our customer chose a single-zone mini split system to elevate their comfort system. Wall mounted units are out of sight and don’t require ductwork, increasing their energy efficiency. Their high delivered efficiency means lower utility bills and will save our customer money. Our customer will be satisfied with the service, savings, and quality this unit brings.
This YORK® air handler and YORK® heat pump were installed to give our customer the best in home comfort. The side-discharge heat pump offers high efficiency with a smaller footprint than traditional heat pumps, and an innovative fan design creates quieter operation. It’s engineered to avoid spikes in energy while increasing system longevity and reducing the homeowner’s energy bills. The modulating technology maintains exact temperatures by operating from 35 to 100 percent capacity, matching the precise degree of heating required. The variable-speed air handler is also designed to be precise. The motors match operation to the exact speed needed, consuming less energy over time and reducing noise levels. To top it off, both units come with 10 year parts warranty due to the high quality production level. We are positive our customer will love their new system and the comfort it brings.
We installed a YORK® side-discharge heat pump and a YORK® variable-speed air handler for our customer’s home. This heat pump is designed to provide all the comfort and technology of a mid-tier efficiency unit at the cost of a base-tier vertical unit. It’s the perfect size for tight spaces at a 40% more compact design than standard units, and the 36% percent quieter operating sound can be as low as 54 dBA. The variable speed air handler matches operation to the exact speed needed, consuming less energy overtime and reducing noise levels. This system will be highly efficient and cut our customer’s energy bill every month.
We gave our customer a few different estimates on the best systems to install in their home, and they chose a YORK® gas furnace and a YORK® split system heat pump. These units are designed to last, providing the best in comfort and savings. They have outstanding warranties; the furnace with lifetime heat exchanger, the heat pump with 10 year compressor, and both with 10 year parts. We are positive this system will serve our customer for many years to come.
Our customer chose a ductless mini-split system to adjust the comfort level of their home. These systems are perfect for small spaces without ductwork and include both heating and cooling for year round comfort. They are great for both residential and commercial. From the easy controls to the automatic temperature adjustments, our customer will be pleased with the operation of their new system.
We installed a YORK® gas furnace and air conditioner for our customer’s home. These units are designed to be compact with a minimum footprint to fit in tight spaces. They are quiet, efficient, and come with great warranties. This system will provide plenty of comfort all year long.
Our customer requested a multi-zone ductless system for the heating and cooling of their home. With a ductless system, there’s no chance to lose heating and cooling in the ductwork, keeping the efficiency high and utility bills low. The wall mounted units are out of sight and quiet. The outdoor unit is compact to accommodate confined spaces. They are designed for versatility and efficiency without sacrificing comfort for our customer.
This gas-fired unit heater is perfect for shops and garages. It’s easily suspended or hung, has clean and rounded corners and edges with no visible screws or fasteners, and provides the same great performance customers expect of their HVAC systems.
We added a YORK® split system heat pump to our customer’s HVAC system. These units have been tested in accelerated field trials and extreme weather testing to ensure reliable performance that lasts. A demand defrost feature minimizes issues with heat pump operation in cold weather, removing frost on the outdoor coil far more effectively than timed methods. A long-lasting, powder coat paint provides a durable, automotive-quality finish that looks great even after years of outdoor exposure. This is built to last our customer through years of inclement weather without losing any of the quality comfort.
We installed a ductless, multi-zone mini-split system in our customer’s home. This system is super quiet and highly efficient, and the ductless design is great when you don’t have ductwork in place. Our customer will love the comfort it provides all year round.
Our customer chose a YORK® gas furnace to keep them warm this winter. It’s designed and assembled in the U.S., ensuring the best in quality and engineering. It’s built with hot-surface ignition and 100% shutoff valve technology to save on fuel costs while increasing dependability. We are positive our customer will be well pleased with the new system for many years to come.
We installed a YORK® split system air conditioner and coil to add cooling to our customer’s HVAC system. This air conditioner is designed with aluminum alloy micro-channel coils for maximum efficiency and durability, saving money through energy costs and quality parts that are less likely to break down. Our customer can enjoy comfortable cooling this summer without worrying about breaking the bank on energy or repairs.
We installed a YORK® air conditioner for our customer’s home. This unit is designed for optimal performance and high efficiency, while keeping a minimum footprint for tight spaces. The quality engineering reduces repairs, and the warranties offered ensure peace of mind. We are positivethis equipment will give our customer full satisfaction and comfort.
We installed an electric furnace and a heat pump for our customer’s mobile home. The electric furnace has a zero-clearance design, allowing for it to be installed in this mobile home where space is at a premium. It features a built-in, fully insulated coil cabinet and efficient operating system. The heat pump’s small footprint cabinet delivers big performance at an affordable price. With a quiet, direct-drive fan design minimizing vibration and sound and reliable cold-weather operation, this will provide comfort and peace of mind for our customer all year long.
We installed a YORK® air conditioner for our customer’s cooling comfort. It’s designed for optimal performance in northern US and Canadian regions, and the high-efficiency microchannel aluminum is manufactured using an improved material system, providing reliable performance and small unit size. This unit will give our customer full satisfaction in service and comfort.
Our customer needed two YORK® air conditioner units to cool their building. These units are coated with an automotive-grade, powdercoat finish for extra durability under the harshest conditions, excellent for sitting on a roof. Many of the components are pretreated and coated as well to resist corrosion and rust creep. Warranties of 10 year compressor and 10 year parts guarantee this equipment’s dependability for years to come. We are certain these units will serve our customer the best in quality and comfort.
We installed a ductless mini split system to heat and cool our customer’s home. Ductless systems are great for heating and cooling more efficiently as air cannot be lost in ductwork, costing more. It offers quiet, year round comfort, and it is flexible in placement with slim, narrow indoor and outdoor units.
Our customer chose a YORK® split system air conditioner to provide cooling for their home. It is built with a minimum footprint and sturdy cabinet design, painted with a powdercoat finish, and offered with a 10 year compressor and parts warranty. We are certain this unit will serve our customer well in quality and comfort.
This mini-split ductless system was chosen to fit our customer’s needs. It is perfect for small spaces; with the slim, wall mounted unit indoors, the narrow, horizontal unit on the roof, and no ductwork between the two, the system can keep our clients comfortable while keeping space at a minimum. With no ductwork losing cooling or heating, it also is more efficient than central air systems. It will serve our customer well without breaking the bank.
We installed a YORK® gas furnace and a YORK® air conditioner for our customer. We had previously installed the furnace a couple years ago, and once the client was ready, we added air conditioning to cool their home. The air conditioner has a direct-drive fan design, minimizing vibration and sound, and the refrigerant delivers environmentally friendly performance. Because this unit is made with quality parts and engineering, it’s backed with a 10 year compressor and parts warranty, keeping the air conditioner’s service top-notch for years to come.
Our customer decided an electric furnace and heat pump would best serve their heating and cooling needs. This electric furnace is perfect for tight spaces with its zero-clearance design, and the built-in, fully insulated coil cabinet saves space and offers an efficient operating system. The heat pump has a robust compressor with reliable operation proven in extreme environment testing. Its optimized coils provide effective airflow and heat transfer, and were they to fail in the first 10 years of installation, the unit comes with an outstanding warranty of 10 year compressor and parts to ensure customer comfort.
Our customer chose these mini-split ductless heat pump systems for their home comfort. Systems like these eliminate the need for bulky ductwork by using thin copper tubing that pumps refrigerant directly to discreet wall mounted units inside. Refrigerant transfers heat from one space to another, whether it’s inside to outside or outside to inside, so the units can provide both heating and cooling. We are positive this equipment will serve our customer well in all seasons.
We installed a YORK® gas furnace and YORK® heat pump to replace our customer’s old system. The compact furnace design makes installation easy and flexible as it fits in tight spaces. Paired with the heat pump, it offsets gas usage for greater energy savings, on top of the already next-level efficiency compared to the older heat pump units. This system will provide both comfort and energy savings.
This YORK® gas furnace and YORK® air conditioner are a great option for our customer’s heating and cooling system. The units are designed, engineered and assembled in the United States using state-of-the-art quality control and assembly processes. This world-class quality and commitment to excellence allows for amazing warranties; the furnace with lifetime heat exchanger and 10 year parts, the air conditioner with 10 year compressor and 10 year parts. With quality design and warranties to back it, this system will deliver comfort for many years to come.
Our customer decided a YORK® gas furnace and YORK® heat pump would be the best choices to install in their home comfort system. This particular side-discharge heat pump meets eligibility for up to $2,000 in tax credits, along with the savings that come from higher efficiency in both units. The heat pump is 40 percent more compact and designed to take up far less space with its narrow, horizontal clearance. The gas furnace has a 33-inch tall cabinet that fits neatly in tight spaces, allowing for installations in basements, attics, recreation rooms, garages, alcoves, and even closets. These units will save our customer both space and money while providing excellent service.
This electric gas furnace and heat pump are great for our customer’s mobile home. The furnace has a zero-clearance design, allowing the furnace to be installed where space is at a premium. It fits perfectly in a mobile home with very little room for extra. The heat pump has a small-footprint cabinet while delivering big performance at an efficient and affordable price. These units will save both space and money without sacrificing our customer’s comfort.
We installed a YORK® air conditioner and coil for our customer’s cooling system. The air conditioner’s quality construction and engineering reduce repairs and is integral to the efficiency of the system, saving you money both every day and in the long run. Plus, the quality allows a warranty of 10 year compressor and 10 year parts, ensuring comfort and savings for years to come.
This YORK® air conditioner and coil were installed to take care of our customer’s comfort needs. The units are designed and built to last; with an automotive-grade powder-coating paint finish, aluminum alloy micro-channel coils, and extruded louver, it’s no wonder it confidently comes with a 10 year compressor and 10 year parts warranty. Our customer’s needs will be met with quality comfort that endures.
This YORK® heat pump is perfect for our customer’s home. They had no cooling system, and with the summer heat they decided to get a system that would work great both in summer and winter. They also live in a flood plain, so we built a stand to keep the unit out of rising waters. We offer our customers the best solutions to fit their individual homes’ needs.
Our customer had a YORK® gas furnace and YORK® heat pump installed to take care of all their HVAC needs. The gas furnace when paired with the heat pump offsets your gas usage for even greater energy savings, and both are designed to be compact in footprint and easy to install. These units make comfort easy and cost-effective.
We added a YORK® air conditioner to our customer’s HVAC system. This unit is designed for optimal performance in northern U.S. and Canadian regions. The high-efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. The sturdy cabinet and top design provide sound performance of 77 dBA or lower. The engineering in this unit is sure to give our customer both quality and reliable comfort.
We installed a YORK® gas furnace and YORK® air conditioner for our customer’s home comfort system. These units are designed, engineered, and assembled in the U.S. using state-of-the-art quality control and assembly processes. Quality like this allows for outstanding warranties of lifetime heat exchanger on the furnace, 10 year compressor on the air conditioner, and 10 year parts on both. We are confident in our customer’s quality comfort for years to come.
Our customer needed a new HVAC system to restore cooling to their home. They decided a YORK® gas furnace and YORK® heat pump would be the best fit for their comfort system. This side-discharge heat pump is designed with a 40 percent smaller footprint compared to traditional vertical discharge units, saving space without sacrificing comfort. It also has lower sound output compared to standard units. Both units come with fantastic warranties. The furnace with lifetime heat exchanger, the heat pump with 10 year compressor, and both with 10 year parts. Our customer can be confident in their equipment and cooling comfort with quality and warranties like this.
We installed a YORK® air conditioner and coil to add cooling to our customer’s comfort system. This air conditioner is designed for optimal performance in northern US and Canadian regions, and the high-efficiency microchannel aluminum coil is manufactured using an improved material system, providing reliable performance and small unit size. An outstanding warranty of 10 year compressor and 10 year parts guarantees cooling at an amazing quality and efficiency for many years.
Our customer needed to replace their cooling system. They believed a YORK® air conditioner would best fit the job. This unit is designed for optimal performance in northern US and Canadian regions. The cooling efficiency can save energy costs compared to older units, and quality engineering reduces repairs to save you money. On top of this, it comes with a 10 year compressor and 10 year parts warranty to ensure lasting comfort.
This YORK® gas furnace and YORK® air conditioner combo was perfect for our long-time customer’s new HVAC system. The furnace is a single-stage operation with a high efficiency blower, and the air conditioner is made with aluminum alloy micro-channel coils for maximum efficiency and durability. Our customer will be saving on their energy bill while enjoying great comfort all year round.
This ductless mini split system was installed in our customer’s home to handle both heating and cooling. These heat pumps use electricity to pump refrigerant and transfer heat energy from one space to another. In the summer, heat energy from inside is absorbed and released outdoors. In the winter, heat energy is absorbed from the outside air and released inside. Our customer will be well taken care of all year long.
We installed a YORK® two-stage air handler and a YORK® heat pump to provide both heating and cooling comfort. The heat pump offers a 10 year compressor warranty, and both come with a 10 year parts warranty. These warranties guarantee years of dependability and comfort.
Our customer chose a YORK® gas furnace to warm their home, both efficiently and economically. The unit is more efficient than standard furnaces, using a five-speed ECM blower motor to improve SEER2 ratings while using less electrical power. While many components are designed to be more efficient, the compact cabinet still fits in tight spaces such as a basement, closet, alcove, attic, recreation room, or garage. We are positive our customer will enjoy quality comfort without breaking the bank each month.
This YORK® heat pump was installed to replace our customer’s old unit that was on its last legs. The unit cooling efficiency can save energy costs compared to older units, and quality engineering reduces repairs to save money. Our customer will find their energy bills lower and quality comfort higher after replacing their unit.
We installed a multi-zone ductless heat pump system in this home to allow heating and cooling in individual rooms. It’s more efficient than a ducted system as no air can be lost in ductwork, and the indoor units have a sound decibel of 21-49 dB(A), creating comfortable and quiet spaces. This user-friendly system will ensure comfort all year round.
Our customer decided to install a new YORK® gas furnace to replace their old furnace after having issues with the blower motor. This new furnace is designed with quality in mind, and this commitment to excellence allows for stellar warranties of lifetime heat exchanger and 10 year parts and labor. Our customer can have peace of mind and quality comfort with their new heating system.
We installed a YORK® air conditioner in our customer’s home to provide cooling comfort during our hot summer days. The cooling efficiency can save energy costs compared to older units, and quality engineering reduces repairs to save money. It also has a direct fan drive design to minimize vibration and sound so our customer can enjoy their home in both peace and comfort.
This YORK® gas furnace we installed for our customer is ultra efficient, engineered and assembled in the United States to ensure state-of-the-art quality control and assembly processes. This high standard in quality allows for outstanding warranties of lifetime heat exchanger and 10 years parts and labor so our customers have no need to worry about their equipment lasting for many years to come.
This rooftop unit was installed at a school gym. A rooftop unit can handle a much larger capacity than a regular residential unit, making it perfect for large, open spaces such as this gym, which can be difficult to heat and cool thoroughly.
We installed this rooftop unit on a big commercial building with many separate rooms to reach. Rooftop units are well equipped to handle the extra workload and ensure comfort to every corner of every office.
We installed this ductless mini split system to handle the specific heating and cooling needs of one room in our customer’s home. Ductless heat pumps are great for spaces that don’t get the same airflow as the rest of the home. The outdoor unit shown here is compact due to its horizontal design; this minimizes the outdoor space it takes up. Our customer will find the system out of sight, out of mind, combined with a unique fan design providing whisper-quiet comfort.
Our customer’s heat stopped working suddenly; our tech found the heat exchanger cracked, a vital component to heating equipment. Due to the age of the furnace, it would be more expensive to repair the unit than to replace it entirely. Due to there being no heat in the building, we quickly got to work ordering their equipment, scheduling a crane to remove and place equipment, and getting their business set back up for full comfort!
This YORK® gas furnace was installed for our customer to enjoy all the comforts of home with lowered energy bills every month. It uses a “blower-off delay” design, electronic hot-surface ignition, and a five-speed, direct-drive ECM blower motor for improved efficiency performance. The unit tested for less than 2% airflow leakage in performance testing conditions. Our customers will be delighted with their new equipment, warm comfort, and lowered bills.
Our technician found many leaks in this customer’s unit. Due to the age and type of unit, we recommended replacing it with a brand-new system. Rooftop units usually require a crane, so we scheduled the equipment and the crane as quickly as possible to return our customers to full heating and cooling service. We take all precautions to ensure the safety of our crew, customers, and pedestrians. While it can be hazardous on roofs, you can’t beat the view!
